The factory strictly implements the IATF 16949 quality management system
The automated production line minimizes human errors
All production processes are recorded in the MES system for traceability
Products undergo testing with ATE1 and ATE2, and 100% inspection is conducted before shipment
CE, IEC, UL, MSDS, UN38.3, CEC, CEI 0-21, UKCA
The cycle life is a debated topic because different suppliers set different environmental conditions .Please refer to our specifications below:
8000 cycles @ 60% EOL, 25°C, 0.2C, 70% DOD
6000 cycles @ 60% EOL, 25°C, 0.5C, 80% DOD
4000 cycles @ 60% EOL, 25°C, 1C, 100% DOD
EOL (End of Life): Under the conditions of 25°C, 1C, and 100% DOD, the battery still has 60% of its usable capacity at 4001 cycles Of course, if you use 80% DOD or 0.2C 0.5C, the EOL lifespan will be higher
1. Cost Savings – Reduce electricity bills by storing energy during off-peak hours and using it during peak demand times
2. Energy Independence – Gain greater control over energy use and reduce reliance on the grid
3. Backup Power – Ensure a reliable power supply during outages, keeping critical systems running smoothly
4. Sustainability – Support the use of renewable energy sources like solar and wind by storing excess energy for later use
5. Grid Stabilization – Contribute to grid stability by balancing supply and demand, reducing the risk of blackouts
6. Optimized Energy Usage – Maximize energy efficiency by using stored energy when needed most, reducing waste
7. Increased Property Value – Enhance the value of your property by integrating advanced energy solutions like BESS
8. Government Incentives – Benefit from potential subsidies and incentives offered for renewable energy and storage systems
We offer battery energy storage systems for both residential and commercial applications
Our offerings range from 5.12 kWh to 50 MWh in capacity, with voltage options spanning from 51.2V (DC) to 1331V (DC) We provide both air-cooled and liquid-cooled systems to meet different application scenarios